FAUCET 601
601
QUALITY CERTIFICATE OF CAST IRON
ANALYSIS RESULTS:
TENSION STRENGTH
|
BDS EN 1563 | Rm Mpa | 252 – 260 |
MICROSTRUCTURE | EN ISO 6906-1 | HB |
CHEMICAL ANALYSIS %
Carb
C |
Silicon
Si |
Μanganese
Mn |
Chromium
Cr |
phosphorus
P |
Sulfur
S |
Cuprum
Cu |
3,21 | 2,05 | 0,75 | 0,11 | 0,10 | 0,075 | 0,27 |
The faucet consists of the following parts:
Its top
The trunk
The base with the trough and
The rack
The faucet column has a height of 123.5 cm, a base width of 45 cm and a length of 50 cm.
The faucet trough is 32 cm in diameter and 19 cm wide.
The trunk has a maximum diameter of 26×26 cm and a minimum diameter of 16×16 cm.
METALLIC ELEMENTS
Metallic elements used in the manufacture of the equipment (screws, connectors, etc.) are made of metals either thermo-galvanized or electro-galvanized, where the surface preparation has been preceded by sandblasting or stainless steel. The dimensions and cross-sections of the metallic elements are sufficient to accommodate (with an appropriate safety factor) the loads for which they have been designed to withstand corrosion and adverse weather conditions.
PAINTS
For their anticorrosive protection, the metal parts are processed to release them, followed by a coating of polyzinc (zinc) and then electrostatic, two-layer polyester powder coating.
All production work processes for the processing of raw materials are carried out according to:
The ISO 9001: 2015 quality system
The environmental management system ISO14001: 2015
The faucet weighs 114.8 kg.