FAUCET 604
604
The faucet is made of cast iron with the following characteristics:
QUALITY CERTIFICATE OF CAST IRON
ANALYSIS RESULTS:
| TENSION STRENGTH
|
BDS EN 1563 | Rm Mpa | 252 – 260 |
| MICROSTRUCTURE | EN ISO 6906-1 | HB | |
CHEMICAL ANALYSIS %
| Carb
C |
Silicon
Si |
Μanganese
Mn |
Chromium
Cr |
phosphorus
P |
Sulfur
S |
Cuprum
Cu |
| 3,21 | 2,05 | 0,75 | 0,11 | 0,10 | 0,075 | 0,27 |
The faucet consists of the following parts:
Its top
The trunk
The base with the trough
The faucet column has a height of 110 cm. The faucet trough is 27 x 27 cm and the height of the ground 43 cm. The orifice from which the water comes out is shaped like a lion’s head.
The faucet weighs 50 kg.
METALLIC ELEMENTS
Metallic elements used in the manufacture of the equipment (screws, connectors, etc.) are made of metals either thermo-galvanized or electro-galvanized, where the surface preparation has been preceded by sandblasting or stainless steel. The dimensions and cross-sections of the metallic elements are sufficient to accommodate (with an appropriate safety factor) the loads for which they have been designed to withstand corrosion and adverse weather conditions.
PAINTS
For their anticorrosive protection, the metal parts are processed to release them, followed by a coating of polyzinc (zinc) and then electrostatic, two-layer polyester powder coating.
All production work processes for the processing of raw materials are carried out according to:
The ISO 9001: 2015 quality system
The environmental management system ISO14001: 2015
