WOODEN STRUCTURE 0010-293

 

0010-293

The composite instrument has a total dimension of 1270×810 cm and a height of 422 cm and includes:

• 1 square loft 82 cm high
• 1 square loft 62 cm high
• 1 loft with height from 102 to 82 cm.
• 1 loft with escalating height from 82 to 62 cm.
• 1 bridge with ropes
• 1 downstairs 82m high fire extinguisher
• 1 climbing ‘122cm loft snake’
• 1 horizontal scale with links
• 1 scale curve
• 1 handful of climbing panels
• 1 straight corrugated slide of 122 cm height.
• 4 squares cover
• 3 arches
• 7 pairs of safety handles
• 3 square lofts 122 cm high
• 1 square loft of 142 cm.
• 1 square loft 162 cm high
• 1 square loft 182 cm high
• 1 staircase for loft height 122 cm.
• 1 climbing net for a loft of 142 cm.
• 1 loft for large open type rotary height 202 cm.
• 1 large open rotary slide of 202 cm height.
• 1 tunnel slide 162 cm high
• 1 corner tunnel 90th
• plugs for screws
• Decorative vertical beams
• mounting bases

SQUARE LOFT 82 cm (with square cover)

The 82 cm loft has a total dimension of 111,5X111,5X322 cm and consists of:

• 4 wooden pillars 9X9 cm and 262 cm high.
• 4 9X9X93.5 cm wood from which 4X4X93.5 cm long piece is removed.
• 1 Wireness Plywood, one side of which has a dark brown relief embossed floor. Its dimensions are 99X99 cm and its thickness is 21mm.

The 262 cm vertical wooden columns are pierced at 74.5 cm and 75.5 cm, one on each of the sides connected to the loft, from their base to the loft floor. These holes are fitted with metal beams Ø 15 mm with a length of 75 mm. It has two air-socket nuts at the corresponding height mounted on their wood hole. Fits with two 3 / 8X13 screws. The hole in the wood is sealed with a polypropylene (PP) plug.

The floor consists of 4 9x9x93.5cm woods on which the wireness of the loft floor is supported.

SQUARED LOFT 62 CM (WITH SQUARE COVER)

The 62 cm loft has a total dimension of 111,5X111,5X242 cm and consists of:

• 4 wooden pillars 9X9 cm and 242 cm high.
• 4 9X9X93.5 cm wood from which 4X4X93.5 cm long piece is removed.
• 1 Wireness Plywood, one side of which has a dark brown relief embossed floor. Its dimensions are 99X99 cm and its thickness is 21mm.

The 242 cm vertical wooden columns are pierced at 54.5 cm and 55.5 cm, one on each of the sides connected to the loft, from their base to the floor of the loft. These holes are fitted with ύ 15 mm steel bores with a length of 75 mm. It has two nuts in the corresponding height which is mounted on the wood hole. Fits with two 3 / 8X13 screws. The hole in the wood is sealed with a polypropylene (PP) plug.

The floor consists of 4 9x9x93.5cm woods on which the wireness of the loft floor is supported.

SQUARE LOFT 122 cm (with square cover)

The 122 cm loft has a total dimensions of 111,5X111,5X362 cm and consists of:

• 4 wooden pillars 9X9 cm and 302 cm high.
• 4 9x9x93.5 cm wood from which approximately 4x4x93.5 cm is removed along a piece.
• 1 Wireness Plywood, one side of which has a dark brown relief embossed floor. Its dimensions are 99X99 cm and its thickness is 21mm.
• 1 square polyethylene cover that applies to the top of the 4 columns.

The vertical wooden columns of height 302 cm are pierced at points of about 116 cm and 117 cm, one on each of the sides connected to the loft, from their base to the floor of the loft. These holes are fitted with Ø 15 mm metal rods with a length of 75 mm.

It has two nuts in the corresponding height mounted on the wood hole. Fits with two 3 / 8X13 screws. The hole in the wood is sealed with a polypropylene (PP) plug.

The floor consists of 4 9x9x93.5cm woods on which the wireness of the loft floor is supported.

SQUARE LOFT 122 cm (with arched cover)

The 122 cm loft has a total dimensions of 111,5X111,5X373 cm and consists of:

• 4 wooden pillars 9X9 cm and 302 cm high.
• 4 9x9x93.5 cm wood from which approximately 4x4x93.5 cm is removed along a piece.
• 1 Wireness Plywood, one side of which has a dark brown relief embossed floor. Its dimensions are 99X99 cm and its thickness is 21mm.
• 1 arch shaped cover that fits on the top of the 4 columns.

The 302 cm vertical wooden columns are pierced at about 116 cm and 117 cm, one on each of the sides connected to the loft, from their base to the loft floor. These holes are fitted with Ø 15 mm metal rods with a length of 75 mm.

It has two nuts in the corresponding height mounted on the wood hole. It is fitted with two 3 / 8X13 screws. The hole in the wood is sealed with a polypropylene (PP) plug.

The floor consists of 4 9x9x93.5cm woods on which the wireness plywood that forms the loft floor is supported.

SQUARE LOFT 142 cm (without cover)

The 12 cm loft has a total dimensions of 111,5X111,5X253 cm and consists of:

• 1 wooden pillar 9×9 cm and 250 cm high.
• 4 9x9x93.5 cm wood from which 4x4x93.5 cm is cut along the length
• 1 Wireness Plywood, one side of which has a dark brown relief embossed floor. Its dimensions are 99X99 cm and its thickness is 21mm).

The vertical wooden column 250 cm high is punctured at points 136.3 cm and 137.5 cm, on each of the sides connected to the loft, from their base to the floor of the loft. These holes are fitted with Ø 15 mm metal rods with a length of 75 mm.

It has two air-tight sockets at the corresponding height which is mounted on their wood hole. Fits with two 3 / 8X13 screws. The hole in the wood is sealed with a polypropylene (PP) plug.

The floor consists of 4 9x9x93.5cm woods on which the wireness of the loft floor is supported. At the top of the columns, polypropylene (PP) lids with a polypropylene (PP) cap of 95X95X60 mm and 4 mm thick 30 mm conical base with hollow top are applied.

SQUARE LOFT 162 cm (without cover)

The 162 cm loft has a total dimensions of 111,5X111,5X273 cm and consists of:

• 4 wooden columns 9X9 cm and 270 cm high.
• 9X9x93.5cm wood from which 4x4x93.5cm is cut along the length
• 2 Wireness plywood, one side of which has a dark brown embossed floor. Its dimensions are 99X99 cm and its thickness is 21mm.

The 270 cm vertical wooden columns are pierced at points 20.3 cm and 21.5 cm and 156.3 cm and 157.5 cm, two on each of the sides connected to the loft, from their base to there to apply the 2 floors. These holes are fitted with Ø 15 mm metal rods with a length of 75 mm.

It has two air-tight sockets at the corresponding height which is mounted on their wood hole. It is fitted with two 3 / 8X13 screws. The hole in the wood is sealed with a polypropylene (PP) plug.

The floor consists of 4 9x9x93.5cm woods on which the wireness of the loft floor is supported. At the top of the columns, polypropylene (PP) lids with a polypropylene (PP) cap of 95X95X60 mm and 4 mm thick 30 mm conical base with hollow top are applied.

SQUARE LOFT 182 CM (WITH SQUARE COVER)

The 182 cm loft has a total dimensions of 111,5X111,5X422 cm and consists of:

• 3 wooden columns 9X9 cm and 362 cm high.
• 8 wood 9X9X93.5 cm from which 4X4X93.5 cm is cut along the length
• 2 Wireness plywood, one side of which has a dark brown embossed floor. Its dimensions are 99X99 cm and its thickness is 21mm

The vertical wooden columns 362 cm high are punctured at points 20.3 cm and 21.5 cm and 176.3 cm and 177.5 cm, two on each of the sides connected to the loft, from their base to there to apply 2 floors. These holes are fitted with Ø  15 mm metal rods with a length of 75 mm.

It has two air-tight sockets at the corresponding height which is mounted on their wood hole. It is fitted with two 3 / 8X13 screws. The hole in the wood is sealed with a polypropylene (PP) plug.

The floors consist of 4 9x9x93.5cm woods on which the laminate flooring is the wireness.

STAIRCASE FOR LOFT 122 cm (for ages 3 and up)

The staircase for loft height 122 cm has dimensions of 93×172 cm and projection length of loft 114 cm. Consists of:

• 2 woods approximately 4,5x20x172 cm.
• 5 woods approximately 4,5x20x88 cm.
• 5 woods approximately 4,5x6x84,5 cm.

The 122 cm staircase handrail consists of:

• 4 wood with curved edges approximately 4,5x9x90 cm.
• 2 woods with curved edges approximately 4,5x9x160 cm.
• 2 specially shaped rectangular birch plywood colored with internal angles of about 45 ° and 135 °, inscribed in a rectangular rectangle of approximately 110×230 cm, 2 cm thick.

Between the 2 x 20×172 cm woods there are 5 4,5x6x84,5 cm x 20 cm woods. On these 5 5,5x20x88 cm woods are applied as presses.

The handrail is made as follows: The 2 woods 4,5x9x160 cm.

are positioned facing each other upwards. They are screwed vertically, 4,5x9x90 cm 2 by 2 on each side. Between the stairs wood 20X 172 cm, the wood 4.5x9x160 cm and the vertical wood 4.5x9x90 cm the rectangular gap on each side of the staircase is covered with birch plywood.

SQUARE SCALE LOFT HEIGHT 102 => 82 cm

The loft of varying height. It has a total dimension of 111,5X111,5X342 cm and consists of:

• 4 wooden columns 9X9 cm and 282 cm high.

Each of the two triangular floors consists of:

• 2 woods 8×4,5×132 cm.
• 4 9x9x93.5 cm wood from which 4x4x93.5 cm is cut along the length
• 2 Wireness plywood, one side of which has a relief anti-skid floor, dark brown in the shape of an isosceles triangle with a bearing 132 cm and 93.5 cm isosceles sides forming the loft floor.

The woods (8×4,5×132 cm2 and 9x9x93.5 cm4) have holes for mounting support to the loft pillars through Ø15 mm metal and 75 mm length and are fitted with two 3 / 8×13 mm screws. The wood hole is sealed with a polypropylene (PP) plug.

SQUARE SCALE LOFT HEIGHT 82 => 62 cm

The 82 cm loft has a total dimension of 111,5X111,5X322 cm and consists of:

• 4 wooden pillars 9X9 cm and 262 cm high.

Each of the two triangular floors consists of:

• 2 woods 8×4,5×132 cm.
• 4 9X9X93.5 cm wood from which 4X4X93.5 cm long piece is removed.
• 2 Wireness plywood, one side of which features an embossed anti-skid floor, dark brown in the shape of an isosceles triangle with a bearing 132 cm and a 93.5 cm isosceles sides forming the loft floor.

The woods (8×4,5×132 2 pcs and 9x9x93,5 4 pcs) are fitted with holes for mounting the loft pillars through Ø15 mm and 75 mm metal studs and are fitted with two 3 / 8×13 mm screws. The opening of the wood hole is sealed with a polypropylene (PP) plug.

BRIDGE WITH ROPES

The activity is 160 cm long, 82 cm high and consists of:

• 1 pc. wood (base) dimensions 160x14x8 cm with adjusting lever
• 2 pcs. wood 170x12x4,5 cm
• 4 pcs. wood cylindrical Ø90 mm X 70 mm high
• 4 pcs. screws 8 mm X 240 mm
• 5 pcs. 192 cm polypropylene (PP) coated wire rope συ 16 mm with 10 / 3X90 mm screws mounted at their ends
• 4 pcs Ø 16 mm polypropylene (PP) coated ropes 82 cm long with 8 pcs 3 / 8X90 mm fitted at their ends
• 4 pcs Ø 16 mm 152 cm polypropylene (PP) coated ropes.
• 8 pcs T-shaped polypropylene (PP) fasteners Ø 32 mm 62X65 mm
• 20 pcs 38mm X50mm polypropylene (PP) clip clips.
• 8 pcs polypropylene safety plugs
• 18 pcs electro galvanized safety nuts 3/8
• 4 pcs electro galvanized safety nuts

his activity joins the two bases of the lamps through the wood (bridge base) in dimensions 160x14x8 cm with a morse 3 cm with holes along the beam per 25.3 cm. The ropes Ø 16 length 192 cm pass through base (the center of the length of the ropes is on the base) and are applied to the two handrails 170x12x4.5 cm with 10 adjustable screws 3 / 8X90mm with 10 pcs safety nuts and covered with 10 pcs polypropylene (PP) fasteners. .

The edges of the beams (170x12x4,5cm) are applied to the vertical beams of the beams with 4 pcs. cylindrical wood Ø 90 mm x 70 mm height with 4 pcs. 8 mm x 2440 mm electro-galvanized screws with 8 pcs at both ends. polypropylene (PP) safety plugs.

The 4 pcs. 152 cm long polypropylene (PP) coated cable (PP) is connected to 5 Ø 16 cable and 192 cm long with 8 pcs. Polypropylene “T” Ø 32 mm 62 mm X 65 mm at their ends with 20 pcs. polypropylene joints 38 mm x 50 mm

The 4 pcs. Polypropylene coated wire rope 82 16 cm long 82 cm with 2 pcs at their ends 4 pcs. 3 / 8X90 mm adjustable screws with 4 safety nuts and covered with polypropylene safety caps.

DOWNHILL FIRE EXTINGUISHER (for 82 cm high loft)

The downhill – fire extinguisher activity consists of a galvanized metal laminate with a cross section of Ø 32 mm and a height of 260 cm. Its lower part is ground to the ground according to EN 1176 standards.

Top section with galvanized hot-rolled metal plate Ø 32 mm cross section and 3 mm thick 93.5 cm elliptical “P” shape with attachment awaiting the loft columns and height specified by EN 1176. At the bottom and on the loft floor, 2 pcs of safety handles are applied.

METAL SNAKE CLIMB (for loft height 122 cm)

The snake is 100x58x300 cm in size and consists of:

• 1 hot rolled galvanized plate, cross section Ø 32 mm, 3 mm thick and 300 cm high.
• 4 hot rolled galvanized sheets, cross section Ø 32 mm and 3 mm thick in semicircular form
• 1 galvanized hot rolled sheet of elliptical “P” shape, cross section Ø 32 mm and thickness 3 mm with dimensions of 93,5X100 cm.

In the 300 cm high plate, the semicircular plates are glued starting from 40 cm high and used as a step. They are applied in such a way as to leave a gap of 31,5X28 cm, to avoid trapping children. At the top of the vertical plate apply the elliptical “P” shaped plate.

HORIZONTAL SCALE WITH HANDLEHEADS

The scale with handles is 300X170 cm and 219 cm high and consists of:

• 2 woods 9X9 cm and 220 cm high.
• 1 x 9x12x300 cm wood
• 2 trapezoidal cross sections 9×9 cm and base dimensions 34 cm and 27 cm.
• 5 handles made of 40cm polypropylene (PP) safety wire rope χωρίς16 (without screw-screwing) with polypropylene (PP) handle Ø 30X14cm fixed length applied to the rope. It has a mechanically pressed metal safety ring with a 3/8 inch Ø 12 electro-galvanized bottom. The rope link is secured with a mechanically pressed metal safety ring.
• 13 pcs polypropylene (PP) safety caps
• 2 pcs electro galvanized screws 15 mm x 25 cm.
• 3 pcs electro galvanized screws 15 mm x 23 cm.
• 4 pcs of galvanized hot-rolled laminates in the shape of “P” 100 cm long, 3 mm thick and 97 mm wide
• 2 pcs 15 mm x 120 mm electro-galvanized screws
• 2 pcs electro galvanized safety nuts M15.

This activity has an elongated “P” shape supported by two “L” shaped beams and on the instrument.

The horizontal beam 300x9x12 cm bears at equal intervals 5 handles with polypropylene plugs (PP) supported by one end of two 220x9x9 “L” beams, each having its upper portion below the horizontal beam. two trapezoidal timbers 34 cm high and 27 cm high and 9 x 9 cm cross-section on both sides inside and outside the two “L” shaped beams with two screws Ø 15 mm x 25 cm with polypropylene plugs at both points.

Trapezoidal woods are applied to the two “L” beams with two 15mm x 23 cm screws and have polypropylene plugs at both ends.

The other end of the horizontal beam is applied to the vertical beam of the instrument with a 15 mm x 23 cm screw and has polypropylene safety caps at both points.

The two vertical beams 220X9X9 cm bear the four lower end mounts of 100 mm 3 mm thickness of 97 mm and 97 mm width applied with a 15 mm x 120 mm electro-galvanized screw.

Curve Scale

The curved scale is 200 cm long and consists of:

• 2 pcs arched wooden beams 8x10x200 cm.
• 5 hot rolled galvanized tubes, cross section Ø 32 shaped with rounded angles 92.5 cm horizontal and 16 cm vertical.
• 10 pcs 15X150 mm electro galvanized screws
• 10 pcs polypropylene (PP) inner cross section Ø 65 mm and 30 mm high
• 10 pcs polypropylene (PP) circular stand inner section Ø 32 mm and 18 mm high
• 4 pcs galvanized hot rolled laminates 240x60x4mm
• 20 pcs 5×70 mm chipmunks
• 8 screws 8X80 mm

Each of the “P” shaped plates is applied to the bottom of the two curved beams, 30 cm apart with a 15X150 mm screw, a safety cap and a cylindrical stand for each vertical side of the “P”.

The distance between the two successive laminates is 30 cm.

The two curved beams are applied to the beams of the instrument using the four 240x60x4 mm plates at each end of the beam.

CLIMBING PANEL (for 82 cm loft)

48×93.5 cm birch plywood panel Fits in the gap between two vertical support beams and the loft. It contains climbing aids on its left and right sides with the first starting 40 cm from the ground level and continuing at equal intervals on each side. At least four climbing aids are installed.

STRAIGHT CORRUGATED SLIDE 122 CM.

The straight corrugated slide has a height of 122 cm and a projection length of 215 cm.

It is manufactured by the rotary extraction method. It consists of linear low density polyethylene and with the addition of materials that provide protection from UV radiation and against static electricity.

Each color, which is non-toxic, is applied by rotary extraction of the mold. It is a one-piece and mounted with a one-piece Hood cover of the same material, for protection against falls

These materials are disciplined by:

• ASTM – D – 790 (Flex Modulus – Flexible elements)
• ASTM – D – 638 (Tensile Strength)
• ASTM -D- 648 (Heat Distortion Temperature- Heated Distortion)
• ARM – STD (Low Temperature Impact – low temperature resistance effect)

The side walls should have a diameter of at least 5 cm. Exceptions should be mentioned.

ASTM = the American Society for Testing and Materials, the American Materials Testing and Testing Service.

HOODS

The slide guard protects children from leaving their seats in order to avoid accidents. It is 105 cm high, 87 cm wide and approximately 10 cm wide.

They are manufactured by the method of rotary extraction into molds. It consists of linear low density polyethylene and with the addition of materials that provide protection from UV radiation and against static electricity.

Each color, which is non-toxic, is applied by rotary extraction of the mold.

These materials are disciplined by:

• ASTM – D – 790 (Flex Modulus – Flexible elements)
• ASTM – D – 638 (Tensile Strength)
• ASTM – D – 648 (Heat Distortion Temperature – Heated Distortion)
• ARM – STD (Low Temperature Impact – low temperature resistance effect)

ASTM = the American Society for Testing and Materials, the American Materials Testing and Testing Service.

SQUARE SHEEP

The square cover is approximately 122x122x70cm long and 102.5 cm long from center hole to center hole on each side.

The lid is manufactured by the rotary extraction molding process. It is formed of linear low density polyethylene and with the addition of materials that provide protection from UV radiation and against static electricity.

Each color, which is non-toxic, is applied by rotary extraction of the mold. These materials are disciplined by:

• ASTM – D – 790 (Flex Modulus – Flexible elements)
• ASTM – D – 638 (Tensile Strength)
• ASTM – D – 648 (Heat Distortion Temperature – Heated Distortion)
• ARM – STD (Low Temperature Impact – low temperature resistance effect)

ASTM = the American Society for Testing and Materials, the American Materials Testing and Testing Service.

SCREW SIDE

The arch has dimensions of about 122x122x81 cm and an inner height of 63 cm.

They are manufactured by the method of rotary extraction into molds. It is formed of linear low density polyethylene and with the addition of materials that provide protection from UV radiation and against static electricity.

Each color, which is non-toxic, is applied by rotary extraction of the mold. It’s a one-piece piece.

These materials are disciplined by:

• ASTM – D – 790 (Flex Modulus – Flexible elements)
• ASTM – D – 638 (Tensile Strength)
• ASTM – D – 648 (Heat Distortion Temperature – Heated Distortion)
• ARM – STD (Low Temperature Impact – low temperature resistance effect)

ASTM = the American Society for Testing and Materials, the American Materials Testing and Testing Service.

SAFETY HANDLES

The safety handles are metallic electrostatic paint with vertical alignment in two, with the inner wrapped at the top. It has a metal blade at its bottom and a point at the top. They are made of a tube Ø 32 mm approximately 80 cm high and spaced apart according to EN 1176. After being degreased, they are coated with polyzinc (zinc) and then electrostatic powder coating.

The safety handles are fitted in places where there are no entry / exit protectors (panels, railings etc.).

CLIMBING NET (for loft height 142 cm)

The climbing net consists of:

• 3 polypropylene (PP) coated ropes, 16 mm cross section and 185 cm long.
• 6 polypropylene (PP) tubular brackets with 27 mm cross-section lengths of 42.5 cm.
• 3 thermally galvanized M8 joints.
• 3 M6 hot-dip galvanized keys.
• 1 metallic electrostatic paint holder with 3 fastening nuts on top and used for underground installation. It is made of “P” shape with a width of 42.5 cm and a height of 65 cm.

The three polypropylene coated ropes are connected to the 5 polypropylene tubular arms (steps) through their anvils and are positioned at intervals. The first step at a height of 40 cm from the ground surface and the rest with a gap of 23 cm between them. The upper ends of the three ropes are connected to the loft by the M10 connectors.

At their lower ends are the ropes with the metal base “II” through the nautical keys, which base is mounted in the ground by means of crimping.

The climbing net is applied to the side of the loft with two metal safety handles.

 

FLOOR 202 cm

The 202cm metal loft has a height of 202cm allowing access to the rotary slide and has a total dimension of 60x90cm. It has 96cm safety panels on both sides.

LARGE OPEN TYPE ROTARY SLIDE 202 cm.

The large open-type rotary slide has a height of 2032 mm. It is manufactured by the molding rotary extraction method. It is formed of linear low density polyethylene with UV stabilizers and provides antistatic (static electricity) protection. Each color, which is non-toxic, is applied by rotary extraction of the mold.

These materials are disciplined by:

• ASTM – D – 790 (Flex Modulus – Flexible elements)
• ASTM – D – 638 (Tensile Strength)
• ASTM – D – 648 (Heat Distortion Temperature – Heated Distortion)
• ARM – STD (Low Temperature Impact – low temperature resistance effect)

The wall diameter must be at least 6 mm in thickness. Exceptions should be mentioned.

ASTM = the American Society for Testing and Materials, the American Materials Testing and Testing Service.

TUNEL SLOWER 162

The tunnel slide has a height of 162 cm. It is manufactured by the molding rotary extraction method. It is formed of linear low density polyethylene with UV stabilizers and has been treated with ‘High Level Antistatic’ (static electricity neutralization treatment).

Each color, which is non-toxic, is applied by rotary extraction of the mold. These materials are disciplined by:

• ASTM – D – 790 (Flex Modulus – Flexible elements)
• ASTM – D – 638 (Tensile Strength)
• ASTM – D – 648 (Heat Distortion Temperature – Heated Distortion)
• ARM – STD (Low Temperature Impact – low temperature resistance effect)

ASTM = the American Society for Testing and Materials, the American Materials Testing and Testing Service

PROTECTIVE FRAME WITH RACES

The railing frame is 93,5X97,5X7 cm and consists of:

• 2 x 4x7x96 cm wood
• 1 semi-circular wood 20×85,5×4,5 cm.
• 1 wood 10×4,5×85,5 cm.
• 8 woods measuring 6×4,5 cm and 60,5 cm high

Between the two wooden columns of 4x7x96cm and 8cm height, 10×4,5×85,5cm wood is applied from their base. so as to leave gaps at both ends according to EN 1176. The wood with the semicircle follows.

PROTECTIVE FRAMEWORK-PANEL

The protective frame measures approximately 85X97X6 cm.

It consists of:

• 2 wooden columns approximately 4X6X97 cm.
• 1 plywood of approximately 85,5X90x2 cm colored birch.

Between the pillars is placed the birch plywood, about 85,5x90x2 cm, in which relief figures or themes can be carved. Place the protective frame flat above the loft floor and secure it to the loft pillars.

POLYETHYLENE CORNER TUNNEL 90th

 

The tunnel forms a 90 ° angle and has an internal opening Ø770 mm. It has two panels used to connect it to the 88 cm wide and 104 cm high lamps.

It is manufactured by the molding rotary extraction method. It is formed of linear low density polyethylene with UV stabilizers and provides antistatic (static electricity) protection. Each color, which is non-toxic, is applied by rotary extraction of the mold. It is one-piece and also has one-piece protective cover of the same material to prevent falls. These materials by:

• ASTM – D – 790 (Flex Modulus – Flexible elements)
• ASTM – D – 638 (Tensile Strength)
• ASTM – D – 648 (Heat Distortion Temperature – Heated Distortion)
• ARM – STD (Low Temperature Impact – low temperature resistance effect)

The wall diameter must be at least 6 mm in thickness. Exceptions should be mentioned.

ASTM = the American Society for Testing and Materials, the American Materials Testing and Testing Service

BACKPACK BASES

For fixing the instrument to the ground, each pair has a pair of mounting bases.

The mounting brackets consist of two galvanized metal plates and then painted with electrostatic paint, shaped “P” and about 100x12x4cm thick and 0.5cm thick, which “embrace” the column and are joined by passing screws 5 / 8 ″ X15. At the bottom there is a metal flange to hold them in the concrete pit.

Only ground irons, which hold the column at least 5 cm above the ground, are prevented from being ground in order to prevent the wood from being eroded by soil moisture.

TIMBER

The wood used is composite non-stick Swedish pine timber, in accordance with EN 351. It is manufactured with a special joint (welding of wood) in different sections depending on the intended use.

COMPOSITE wood is 40% stronger than whole wood. It has a strength of 360 kp / m2 and a specific weight of about 480 kg / m3.

• Contains about 15% moisture
• Contains minimal juices (resin) compared to other pine family trees in other countries (weather in northern Sweden up to -25 ° C)
• Has thermal conductivity s = 0.10 Kcal / Mho and sound insulation 3.5 times greater than concrete or brick of equal thickness.
• Has antimagnetic properties and is a poor conductor of electricity
• Resistant to fire and classified in categories F30 and F60 (by DIN 4120) according to its cross-section.
• When the outer part of the cross-section burns, its interior protects and retains its durability.
• It is processed just like commercial wood
• Maintains its shape and distorts or creates minimal fractures
• Annual wood rings are usually perpendicular to the long side of the cross-section with a significant increase in the mechanical strength of this surface when applied to floors.

All corners of the wood are planed with a radius of about 5 mm.

PAINTED PLYWOOD BIRCH

The plywood elements required for our constructions are approximately 20 mm thick and are made of 1.5 mm thick laminated wood with pressurized heat sealant using non-toxic phenolic base resins. They are painted with water-soluble paints to which no seals, thinners or paints containing lead, chromium, cadmium or other heavy metals have been attached. The colors are also very resistant to adverse weather conditions.

The above plywood sheets are in accordance with EN 314-2. The quality of the plywood is such that no further processing is required before painting, such as, for example, stocking, and reliefs and themes can be engraved.

PLASTIC INFORMATION

The plastic components required to manufacture the equipment are highly resistant to UV radiation and adverse weather conditions. Preferred are recyclable materials such as polyethylene (PE) or polypropylene (PP). Specifically all screws protruding from the equipment over 5 mm are covered with polypropylene (PP) plastic plugs. They are also safe for the safety and health of children.

METAL ELEMENTS

The metallic elements used in the manufacture of the equipment (screws, joints, etc.) are made of metals either thermo-galvanized or electro-galvanized, where the surface preparation has been preceded by sandblasting or stainless steel. The dimensions and cross-sections of the metallic elements are sufficient to accommodate (with an appropriate safety factor) the loads for which they have been designed to withstand corrosion and adverse weather conditions.

PAINTS

The varnishes and the colors that protect the wooden parts are specially designed for the climate of our country (temperature changes, open or closed areas etc.) are absolutely harmless to the users (they do not contain lead, chromium, cadmium and other heavy metals). ) and give great durability to our constructions.

For their anticorrosive protection, the metal parts are processed to release them, followed by a coating of polyzinc (zinc) and then an electrostatic two-layer polyester powder coating.

 

PACKING

The following procedure is used for fixing the equipment:

At this point where the column is to be placed, an 80 cm deep pit is opened. about 60cm in diameter. Then, once the column is inserted, the pit is filled with frusto-concreted concrete until it reaches 10 cm. from the surface of the ground, where it is covered with soil.

Only ground irons, which hold each column at a distance of about 10 cm from the ground, are prevented on the ground in order to prevent the wood from corroding the soil moisture.

All production work processes for the processing of raw materials are carried out according to:

• EN 1176 standards 1-6,
• ISO 9001: 2015 quality system
• The ISO 14001: 2015 environmental management system