WOODEN STRUCTURE 0010-218
The composite instrument includes:
- 2 lofts 92 cm high
- 1 staircase for 92 cm high loft
- 1 tunnel bridge (2 pcs one meter)
- 2 slides of corrugated height 92 cm.
- 2 squares cover
- 1 triple play
- protective railings
- plugs for gears
- Decorative vertical beams
- mounting bases
SQUARE PATRIAR 92 cm
The 92 cm loft has a total dimension of 111,5X111,5X332 cm and consists of:
- 4 wooden pillars 9X9 cm and 272 cm high.
- 4 9x9x93.5cm wood from which 4x4x93.5cm length is removed.
- 1 Wireness Plywood, one side of which features a dark brown, non-slip floor. Its dimensions are 99X99 cm and its thickness is 21mm.
- 1 arch shaped cover that fits on the top of the 4 columns.
The 272 cm vertical wooden columns are pierced at 84.5 cm and 85.5 cm, one on each of the sides connected to the loft, from their base to the loft floor. These holes are fitted with 15 mm ύ 15 mm metal beams with two nuts in the corresponding height mounted on their wood holes. Fits with two 3 / 8X13 screws. The opening of the wood hole is sealed with a polypropylene (PP) plug.
The floor is made up of 4 9x9x93.5 cm wood on which the laminate flooring is the wireness.
SQUARE PATRIAR 92 cm
The 92 cm loft has a total dimension of 111,5X111,5X203 cm and consists of:
- 2 wooden columns 9X9 cm and 200 cm high.
- 4 9x9x93,5 cm wood from which 4x4x93,5 cm length is removed.
- 1 Wireness Plywood, one side of which features a dark brown, non-slip floor. Its dimensions are 99X99 cm and its thickness is 21mm.
The 200 cm vertical wooden columns are pierced at 84.5 cm and 85.5 cm, one on each of the sides connected to the loft, from their base to the loft floor. These holes are fitted with 15 mm π 15 mm metal beams with two nuts in the corresponding height mounted on their wood holes. Fits with two 3 / 8X13 screws. The opening of the wood hole is sealed with a polypropylene (PP) plug.
The floor consists of 4 9x9x93.5cm woods on which the plywood (loft floor) is based. At the top of the columns, polypropylene (PP) caps with polypropylene (PP) caps are dimensioned 95X95X60 mm and 4 mm thick with a 30 mm base with a hollow top.
STAIR FOR FLAT 92 cm
The 92cm loft staircase measures 93X135cm and the projection length of the 92cm loft consists of:
- 2 wood 4.5,520×135 cm
- 4 wood 4,5x20x84,5 cm
- 4 wood 4,5x6x84,5 cm.
The 92cm staircase handrail consists of:
- 4 wood with curved edges 4,5x9x90 cm.
- 2 wood with curved edges 4,5x9x130 cm.
- 2 specially shaped rectangular birch plywood colored with internal angles of about 45 ° and 135 °, inscribed in a rectangular rectangle of approximately 110×200 cm, 2 cm thick.
Between the 2 x 20×135 cm timbers are placed the 4 x 4.5x6x84.5 cm x 20 cm timbers. On these 4 4x xxxxxxx.5 cm timbers are applied as presses.
The handrail is made as follows: The 2 woods 4,5x9x130 cm.
they are facing each other upwards. In these, they are screwed vertically 4,5x9x90 cm 2 by 2 on each side. Between the stairs of 20×135 cm, the sticks of 4,5x9x160 cm and the vertical sticks of 4.5x9x90 cm the rectangular gap on each side of the staircase is covered with birch plywood.
BRIDGE TUNNEL
The tunnel has dimensions: 97 cm high, 104 cm wide and 100 cm long and consists of:
- 24 woods 3×9 cm and 100 cm long
- 7 woods 4,5x15x93,5 cm
- 2 woods 9X9X104 cm.
- 2 50×8 mm semicircular blades
The tunnel floor consists of 7 timbers of 4.5×15 cm and 93.5 cm in length. At the two ends of the floor are the semicircular blades on which the 24 timber 3×9 cm and 100 cm in length are screwed to form the blade. the tunnel.
TROUBLE STRAIGHT WAVES HEIGHT 92 cm.
The straight corrugated slide has a height of 92 cm and a projection length of 198 cm. It is manufactured by the mold extraction method. It is formed of linear low density polyethylene with UV stabilizers and provides antistatic (static electricity) protection.
Each color, which is non-toxic, is applied by rotary extraction of the mold. It is one-piece and also has a one-piece protective cover to prevent falls. These materials are disciplined by:
- ASTM – D – 790 (Flex Modulus – Flexible elements)
- ASTM – D – 638 (Tensile Strength)
- ASTM – D – 648 (Heat Distortion Temperature – Heated Distortion)
- ARM – STD (Low Temperature Impact – low temperature impact effect)
The wall diameter should be at least 6 mm in thickness. Exceptions should be mentioned.
ASTM = the American Society for Testing and Materials, the American Materials Testing and Testing Service
THROUGH GAME
The trellis is 94,5X96x4,5 cm and consists of:
- 2 x 4x7x96 cm wood.
- 1 semi-circular wood 30×85,5×4,5 cm with borscht
- 1 wood 20×4,5×85,5 cm with borscht
- 2 woods 6×4,5 cm and 40 cm high with borscht
- 9 cylinders of 95 mm diameter and 130 mm height.
- 3 pcs. hot-rolled sheets of cross-section Ø 16 and 50 cm long (cross the wooden rolls).
Between the two vertical wooden columns 96X7X4 cm and at a height of 8 cm from their base, wood 85,5x20x4,5 cm is applied at the bottom and the upper part of the wood with the semicircular dimension 85,5x30x4,5 cm also with borscht.
Vertical and at a distance of 996x7x4 cm) apply two wood 40×4,5×6 cm. Between the two horizontal woods 85,5x30x4,5 cm and 85,5x20x4,5 cm apply the 3 hot-rolled laminates Ø 16 cm and 50 cm long with three wooden rolls Ø 95 and 130 mm high for each laminate.
HOODS
The slide guard protects children from sitting in the seat to avoid accidents. It is 105 cm high, 87 cm wide and approximately 10 cm wide.
They are manufactured by the method of rotary extraction into molds. It consists of linear low density polyethylene and with the addition of materials that provide protection from UV radiation and against static electricity.
Each color, which is non-toxic, is applied by rotary extraction of the mold.
These materials are disciplined by:
- ASTM – D – 790 (Flex Modulus – Flexible elements)
- ASTM – D – 638 (Tensile Strength)
- ASTM – D – 648 (Heat Distortion Temperature – Heated Distortion)
- ARM – STD (Low Temperature Impact – low temperature impact effect)
ASTM = the American Society for Testing and Materials, the American Materials Testing and Testing Service.
SQUARE SHEEP
The square cover is approximately 122x122x70cm and has a hole-to-center dimension of 102.5cm on each side.
The cover is manufactured by the rotary extraction method molded. It is formed of linear low density polyethylene and with the addition of materials that provide protection from UV radiation and against static electricity.
Each color, which is non-toxic, is applied by rotary extraction of the mold. These materials are disciplined by:
- ASTM – D – 790 (Flex Modulus – Flexible elements)
- ASTM – D – 638 (Tensile Strength)
- ASTM – D – 648 (Heat Distortion Temperature – Heated Distortion)
- ARM – STD (Low Temperature Impact – low temperature impact effect)
ASTM = the American Society for Testing and Materials, the American Materials Testing and Testing Service.
PROTECTIVE FRAMEWORK-PANEL
The protective frame measures approximately 85X97X6 cm.
It consists of:
- 2 wooden columns approximately 4x6x97 cm.
- 1 plywood of colored birch approximately 85,5X90x2 cm.
Between the pillars is placed the birch plywood, approximately 85,5X90x2 cm, in which relief figures or themes can be carved. Place the protective frame flat above the loft floor and secure to the loft pillars.
BACKPACK BASES
For fixing the instrument to the ground, each pair has a pair of mounting bases.
The mounting brackets consist of two galvanized metal plates and then painted with electrostatic paint, “P” shaped and approximately 100x12x4 cm thick and 0.5cm thick, which “hug” the column and are joined by 5/8 bypass screws. ″ X15. At the bottom there is a metal flange to hold them in the concrete pit.
Only ground irons, which hold the column at least 5 cm above the ground, are prevented from being ground in order to prevent the wood from being corroded by soil moisture.
TIMBER
The wood used is composite non-stick Swedish pine timber, in accordance with EN 351. It is manufactured with special compound (welding of wood) in different sections depending on the intended use.
COMPOSITE wood is 40% stronger than whole wood. It has a strength of 360 kp / m2 and a specific weight of about 480 kg / m3.
- Contains about 15% moisture
- Contains minimal juices (resin) compared to other pine family trees in other countries (weather in Northern Sweden up to -25 ° C)
- Has thermal conductivity s = 0.10 Kcal / Mho and sound insulation 3.5 times greater than concrete or brick of equal thickness.
- It has antimagnetic properties and is a poor conductor of electricity
- Resistant to fire and classified in categories F30 and F60 (by DIN 4120) according to its cross-section.
- When the outer part of the cross-section burns, its interior protects and retains its durability.
- It is processed just like commercial wood
- Maintains its shape and distorts or creates minimal fractures
- Annual wood rings are usually perpendicular to the long side of the cross-section with a significant increase in the mechanical strength of this surface, if applied to floors.
All corners of the wood are planed with a radius of about 5 mm.
COLORED PLYWOOD BIRCH
The plywood elements required for our constructions are approximately 20 mm thick and are made of 1.5 mm thick timber sheets bonded to each other by pressure-sealing using non-toxic phenolic base resins. They are painted with water-soluble paints to which no seals, thinners or paints containing lead, chromium, cadmium or other heavy metals have been attached. The colors are also very resistant to adverse weather conditions.
The above plywood sheets are in accordance with EN 314-2. The quality of the plywood is such that no further processing is required before painting, such as, for example, stocking, and reliefs and themes can be engraved.
PLASTIC INFORMATION
The plastic components required to manufacture the equipment are highly resistant to UV radiation and adverse weather conditions. Preferred are recyclable materials such as polyethylene (PE) or polypropylene (PP). Specifically all screws protruding from the equipment over 5 mm are covered with polypropylene (PP) plastic plugs. They are also safe for the safety and health of children.
METALLIC ELEMENTS
Metallic elements used in the manufacture of the equipment (screws, joints, etc.) are made of metals either thermo-galvanized or electro-galvanized, where the surface preparation has been preceded by sandblasting or stainless steel. The dimensions and cross-sections of the metallic elements are sufficient to accommodate (with an appropriate safety factor) the loads for which they have been designed to withstand corrosion and adverse weather conditions.
PAINTS
The varnishes and colors that protect the wooden parts are specially designed for the climate of our country (temperature changes, open or closed areas etc.) are completely harmless to the users (they do not contain lead, chromium, cadmium and other heavy metals) ) and give great strength to our constructions.
For their anticorrosive protection, the metal parts are processed for polishing, followed by a coating of polyzinc (zinc) and then electrostatic, two-layer polyester powder coating.
PACKING
The following procedure is used for fixing the equipment:
At this point where the column is to be placed, an 80 cm deep pit is opened. about 60cm in diameter. Then, after the column is inserted, the pit is filled with frusto-concreted concrete until it reaches 10 cm. from the ground surface, where it is covered with soil.
Only ground irons, which hold each column at a distance of about 10 cm from the ground, are prevented on the ground in order to prevent the wood from being corroded by soil moisture.
All production work processes for the processing of raw materials are carried out according to:
- EN 1176 standards 1-6,
- ISO 9001: 2015 quality system
- The ISO 14001: 2015 environmental management system
