WOODEN STRUCTURE 0010-217A

 

The instrument consists of:

 

• 3 square lofts
• 3 stairs for lofts
• 3 squares of cover
• 3 corrugated slides
• protective smiles
• plugs for screws
• mounting bases

 

SQUARE PATRIAR 92 cm

The 92 cm loft has a total dimension of 111,5X111,5X203 cm and consists of:

• 2 wooden columns 9X9 cm and 200 cm high.
• 4 9x9x93,5 cm wood from which 4x4x93,5 cm length is removed.
• 1 Wireness Plywood, one side of which features a dark brown, non-slip floor. Its dimensions are 99X99 cm and its thickness is 21mm.

The 200 cm vertical wooden columns are pierced at 84.5 cm and 85.5 cm at each of the sides connected to the loft, from their base to the loft floor. These holes are fitted with 15 mm π 15 mm metal beams with two nuts in the corresponding height mounted on their wood holes. Fits with two 3 / 8X13 screws. The opening of the wood hole is sealed with a polypropylene (PP) plug.

The floor is made up of 4 9x9x93.5 cm wood on which the laminate flooring is the wireness. At the top of the columns, polypropylene (PP) caps with polypropylene (PP) caps are dimensioned 95X95X60 mm and 4 mm thick with a 30 mm base with a hollow top.

 

STAIR FOR FLAT 92 cm

 

The 92 cm high staircase ladder measures 93X135 cm and the surface length is 92 cm. It consists of:

• 2 wood 4.5,520×135 cm
• 4 wood 4,5x20x84,5 cm
• 4 wood 4,5x6x84,5 cm.

The 92cm staircase handrail consists of:

• 4 wood with curved edges 4,5x9x90 cm.
• 2 wood with curved edges 4,5x9x130 cm.
• 2 specially shaped rectangular birch plywood colored with internal angles of about 45 ° and 135 °, inscribed in a rectangular rectangle of approximately 110×200 cm, 2 cm thick.

Between the 2 x 20×135 cm timbers are placed the 4 x 4.5x6x84.5 cm x 20 cm timbers. On these 4 timbers of 4,5 x 20×84,5 cm are applied as presses.

The handrail is made as follows: The 2 woods 4.5x9x130 cm are facing each other and facing upwards. In these, they are screwed vertically 4,5x9x90 cm 2 by 2 on each side. Between the stairs of 20×135 cm, the sticks of 4,5x9x160 cm and the vertical sticks of 4.5x9x90 cm the rectangular gap on each side of the staircase is covered with birch plywood.

 

SQUARE SHEEP

 

The square cover is approximately 122x122x70cm and has a hole-to-center dimension of 102.5cm on each side.

The cover is manufactured by the rotary extraction method molded. It is formed of linear low density polyethylene and with the addition of materials that provide protection from UV radiation and against static electricity.

Each color, which is non-toxic, is applied by rotary extraction of the mold. These materials are disciplined by:

• ASTM – D – 790 (Flex Modulus – Flexible elements)
• ASTM – D – 638 (Tensile Strength)
• ASTM – D – 648 (Heat Distortion Temperature – Heated Distortion)
• ARM – STD (Low Temperature Impact – low temperature impact effect)

ASTM = the American Society for Testing and Materials, the American Materials Testing and Testing Service.

 

HOODS

 

The slide guard protects children from sitting in the seat to avoid accidents. It is 105 cm high, 87 cm wide and approximately 10 cm wide.

They are manufactured by the method of rotary extraction into molds. It consists of linear low density polyethylene and with the addition of materials that provide protection from UV radiation and against static electricity.

Each color, which is non-toxic, is applied by rotary extraction of the mold.

These materials are disciplined by:

• ASTM – D – 790 (Flex Modulus – Flexible elements)
• ASTM – D – 638 (Tensile Strength)
• ASTM – D – 648 (Heat Distortion Temperature – Heated Distortion)
• ARM – STD (Low Temperature Impact – low temperature impact effect)

ASTM = the American Society for Testing and Materials, the American Materials Testing and Testing Service.

 

PROTECTIVE FRAMEWORK-PANEL

 

The protective frame measures approximately 85X97X6 cm.

It consists of:

• 2 wooden columns approximately 4X6X97 cm.
• 1 plywood of approximately 85,5X90x2 cm birch color.

Between the pillars is placed the birch plywood, approximately 85,5X90x2 cm, in which relief figures or themes can be carved. Place the protective frame flat above the loft floor and secure to the loft pillars.

 

BACKPACK BASES

 

For fixing the instrument to the ground, each pair has a pair of mounting bases.

The mounting brackets consist of two galvanized metal plates and then painted with electrostatic paint, “P” shaped and approximately 100x12x4 cm thick and 0.5cm thick, which “hug” the column and are joined by 5/8 bypass screws. ″ X15. At the bottom there is a metal flange to hold them in the concrete pit.

Only ground irons, which hold the column at least 5 cm above the ground, are prevented from being ground in order to prevent the wood from being eroded by soil moisture.

 

TIMBER

 

The wood used is composite non-stick Swedish pine timber, in accordance with EN 351. It is manufactured with special compound (welding of wood) in various sections depending on the intended use.

COMPOSITE wood is 40% stronger than whole wood. It has a strength of 360 kp / m2 and a specific weight of about 480 kg / m3.

• Contains about 15% moisture
• Contains minimal juices (resin) compared to other pine family trees in other countries (weather in Northern Sweden up to -25 ° C)
• Has thermal conductivity s = 0.10 Kcal / Mho and sound insulation 3.5 times greater than concrete or brick of equal thickness.
• It has antimagnetic properties and is a poor conductor of electricity
• Resistant to fire and classified in categories F30 and F60 (by DIN 4120) according to its cross-section.
• When the outer part of the cross-section burns, its interior protects and retains its durability.
• It is processed just like commercial wood
• Maintains its shape and distorts or creates minimal fractures
• Annual wood rings are usually perpendicular to the long side of the cross-section with a significant increase in the mechanical strength of this surface, if applied to floors.

All corners of the wood are planed with a radius of about 5 mm.

 

COLORED PLYWOOD BIRCH

 

The plywood elements required for our constructions are approximately 20 mm thick and are made of 1.5 mm thick timber sheets bonded to each other by pressure-sealing using non-toxic phenolic base resins. They are painted with water-soluble paints to which no seals, thinners or paints containing lead, chromium, cadmium or other heavy metals have been attached. The colors are also very resistant to adverse weather conditions.

The above plywood sheets are in accordance with EN 314-2. The quality of the plywood is such that no further processing is required before painting, such as, for example, stocking, and reliefs and themes can be engraved.

 

PLASTIC INFORMATION

 

The plastic components required to manufacture the equipment are highly resistant to UV radiation and adverse weather conditions. Preferred are recyclable materials such as polyethylene (PE) or polypropylene (PP). Specifically all screws protruding from the equipment over 5 mm are covered with polypropylene (PP) plastic plugs. They are also safe for the safety and health of children.

 

METALLIC ELEMENTS

 

The metallic elements used in the manufacture of the equipment (screws, connectors, etc.) are made of metals either thermo-galvanized or electro-galvanized, with surface preconditioned by sandblasting or stainless steel. The dimensions and cross-sections of the metallic elements are sufficient to accommodate (with an appropriate safety factor) the loads for which they have been designed to withstand corrosion and adverse weather conditions.

 

PAINTS

The varnishes and colors that protect the wooden parts are specially designed for the climate of our country (temperature changes, open or closed areas etc.) are completely harmless to the users (they do not contain lead, chromium, cadmium and other heavy metals) ) and give great strength to our constructions.

For their anticorrosive protection, the metal parts of the mill are processed for polishing, followed by a coating of polyzinc (zinc) followed by a two-layer electrostatic powder coating.

 

PACKING

 

The following procedure is used for fixing the equipment:

At this point where the column is to be placed, an 80 cm deep pit is opened. about 60cm in diameter. Then, after the column is inserted, the pit is filled with frusto-concreted concrete until it reaches 10 cm. from the ground surface, where it is covered with soil.

Only ground irons, which hold each column at a distance of about 10 cm from the ground, are prevented on the ground in order to prevent the wood from being corroded by soil moisture.

 

All production work processes for the processing of raw materials are carried out according to:

• EN 1176 standards 1-6,
• ISO 9001: 2015 quality system
• The ISO 14001: 2015 environmental management system

 

The sandblast is made of Swedish pine wood, in accordance with EN 351. It is 200×200 cm and consists of 4,5×30 cm cross-sections, which are joined by 8×10 screws.

 

There is a 4.5×15 cm perimeter cross section at the top of the gravel so that all users of the gravel can sit. For the same reason, in the four corners of the sanding block are placed semi-circular seats 4,5x30x30 cm. The floor of the structure consists of colored birch plywood 200×200 cm.

 

All wooden parts are covered with a special varnish suitable for outdoor use that protects the wood from micro-organisms and emphasizes its characteristics.

 

TIMBER

 

The wood used is composite non-stick Swedish pine timber, in accordance with EN 351. It is manufactured with special compound (welding of wood) in different sections depending on the intended use.

 

COMPOSITE wood is 40% stronger than whole wood. It has a strength of 360 kp / m2 and a specific weight of about 480 kg / m3.

 

It contains about 15% moisture

Contains minimal juices (resin) compared to other pine family trees in other countries (weather in northern Sweden up to -25 ° C)

It has thermal conductivity s = 0.10 Kcal / Mho and sound insulation 3.5 times greater than concrete or brick of equal thickness.

It has antimagnetic properties and is a poor conductor of electricity

It can withstand fire and is classified in categories F30 and F60 (by DIN4120) according to its cross section.

When the outer part of the cross-section burns, its interior protects and retains its strength.

It is processed just like commercial wood

It retains its shape and distorts or creates minimal fractures

Annual wood rings are usually perpendicular to the long side of the cross-section with a significant increase in the mechanical strength of this surface, if applied to floors.

All corners of the wood are planed with a radius of about 5 mm.

 

COLORED PLYWOOD BIRCH

The plywood elements required for our constructions are approximately 20 mm thick and are made of 1.5 mm thick timber sheets bonded to each other by pressure-sealing using non-toxic phenolic base resins. They are painted with water-soluble paints to which no seals, thinners or paints containing lead, chromium, cadmium or other heavy metals have been attached. The colors are also very resistant to adverse weather conditions.

 

The above plywood sheets are in accordance with EN 314-2. The quality of the plywood is such that no further processing is required before painting, such as, for example, stocking, and reliefs and themes can be engraved.

 

PLASTIC INFORMATION

 

The plastic components required to manufacture the equipment are highly resistant to UV radiation and adverse weather conditions. Preferred are recyclable materials such as polyethylene (PE) or polypropylene (PP). Specifically all screws protruding from the equipment over 5 mm are covered with polypropylene (PP) plastic plugs. They are also safe for the safety and health of children.

 

METALLIC ELEMENTS

 

The metallic elements used in the manufacture of the equipment (screws, joints, etc.) are made of metals either thermo-galvanized or electro-galvanized, where the surface preparation has been preceded by sandblasting or stainless steel. The dimensions and cross-sections of the metallic elements are sufficient to accommodate (with an appropriate safety factor) the loads for which they have been designed to withstand corrosion and adverse weather conditions.

PAINTS

The varnishes and colors that protect the wooden parts are specially designed for the climate of our country (temperature changes, open or closed areas etc.) are completely harmless to the users (they do not contain lead, chromium, cadmium and other heavy metals) ) and give great strength to our constructions.

 

PACKING

 

The following procedure is used for fixing the equipment:

 

At this point where the column is to be installed, a pit about 80 cm deep and 60 cm in diameter is opened. Then, once the column is inserted, the pit is filled with frusto-concrete concrete until it reaches 20 cm. from the ground surface, where it is covered with soil.

 

Only ground irons, which hold each column at a distance of about 10 cm from the ground, are prevented on the ground in order to prevent the wood from being corroded by soil moisture.

 

 

 

All production work processes for the processing of raw materials are carried out according to:

 

EN 1176 standards 1-6,

The ISO9001: 2015 quality system

The environmental management system ISO14001: 2015