BENCH WITH PENDANTS 0020-313
0020-313
The pendants and the bench are made of wooden elements. This construction consists of two jardinerias and a bench. It has total dimensions: 59 cm wide, 300 cm long and 50 cm high. Each dressing room has internal dimensions: 50 cm wide, 70 cm long and 50 cm high.
They are made of five wooden frames of 4.5x10cm cross section timber. Each timber frame consists of two 4.5x10cm and 50cm cross sections, and two 4.5x10cm and 79cm cross sections. The two 50cm lengths are bonded internally to 79cm lengths using 5X80 screws.
The five frames are connected by 8X120 screws. The bench consists of four wooden sections of 4.5x15cm and 140cm length and rests on two 8x40cm and 55cm wooden sections.
TIMBER
The wood used is composite non-stick Swedish pine timber, in accordance with EN 351. It is manufactured with a special compound (welding of wood) in various sections depending on the intended use.
COMPOSITE wood is 40% stronger than whole wood. It has a strength of 360 kp / m2 and a specific weight of about 480 kg / m3.
It contains about 15% moisture
Contains minimal juices (resin) compared to other pine family trees in other countries (weather in northern Sweden up to -25 ° C)
It has thermal conductivity s = 0.10 Kcal / Mho and sound insulation 3.5 times greater than concrete or brick of equal thickness.
It has antimagnetic properties and is a poor conductor of electricity
It can withstand fire and is classified in categories F30 and F60 (by DIN4120) according to its cross section.
When the outer part of the cross-section burns, its interior protects and retains its strength.
It is processed just like commercial wood
It retains its shape and distorts or creates minimal fractures
Annual wood rings are usually perpendicular to the long side of the cross-section with a significant increase in the mechanical strength of this surface when applied to floors.
All corners of the wood are planed to a radial of 5 mm minimum.
METALLIC ELEMENTS
The metallic elements used in the manufacture of the equipment (screws, joints, etc.) are made of metals either thermo-galvanized or electro-galvanized, where the surface preparation has been preceded by sandblasting or stainless steel. The dimensions and cross-sections of the metallic elements are sufficient to accommodate (with an appropriate safety factor) the loads for which they have been designed to withstand corrosion and adverse weather conditions.
PAINTS
The varnishes and paints that protect the wooden parts are specially designed for the climate of our country and are absolutely harmless to the users (they do not contain lead, chromium, cadmium or other heavy metals) and give high strength to our constructions.
All production work processes for the processing of raw materials are carried out according to
The ISO 9001: 2015 quality system
The environmental management system ISO14001: 2015
