LITTER BIN 0020-314
0020-314
The main body consists of three parts, the trunk and its two bases.
The trunk is shaped in an octagonal prism with vertical press angular ribs and perimeter reinforcements 10 mm thick, designed to provide stability and durability throughout the structure. It is made of galvanized 2.0mm thick steel.
Its upper and lower bases are shaped into octagonal notches with an outer spacer 600 mm fretally connected to the main body of the body, made of 5.0 mm thick cast iron, with almond-colored miniaturization and special anti-shrinkage treatment . The front and top of the lock are locked with a triangular longitudinal wrench according to DIN 22.417, to allow the scraper to open, to release the inner tray and to absorb it.
The bottom base, which forms the base of the scrubber, has two additional metal sockets, suitable for fixing the scrubber to the ground with raffia. The lid is flat and slightly inclined. It bears the center of the 200 mm spacer octagonal hole and opens upwards.
It is made of 5.0 mm thick cast iron, with standard chromium aluminum chromatography and treated with a special adhesive with consistency of molecules and additional suitable corrosion treatment. It is fitted to the main body with a suitable cuff that rests on the top rear of the trash can. The lid automatically locks into its closed position.
The inner trash can is cylindrical, with a capacity of 60 liters, with reinforcing circumferential ribs.
It is made of galvanized steel, 0.4mm thick, and its margin forms a perimeter reinforcing cord. On the top and symmetrically there are two comfortable and convenient handles for his leave.
METALLIC ELEMENTS
The metallic elements used in the manufacture of the equipment (screws, connectors, etc.) are made of either thermoplastic or electroconductive metals, where the surface is prepared by sandblasting or stainless steel (stainless steel). The dimensions and cross-sections of the metallic elements are sufficient to receive (with an appropriate safety factor) the loads for which they have been designed to withstand corrosion and adverse weather conditions.
PAINTS
For their anti-rust protection, the metal parts are treated for enjoyment, followed by a zinc coating followed by a two-layer electrostatic polyester coating.
All production work processes for the processing of raw materials are carried out according to:
The ISO 9001: 2015 quality system
The ISO 14001: 2015 Environmental Management System
