LITTER BIN 0020-317
020-317
The bin is made of 0.6mm thick steel sheet for its main body and bottom. Its main body is cylindrical, 48 cm high and 30 cm in diameter, with reinforcing circumferential ribs and decorative rhomboid perforations.
At the top, it is open for comfortable throwing of light footage of pedestrians. Its bottom has 4 escape holes to drain rainwater and waste liquid into the bin. They can also be adapted to existing poles to save pedestrians.
Between the bucket and the decorative bracket there is a 2.0mm thick steel special decorative bracket. Its cross-section is P-shaped and has a circle and two triangles at the bottom. It is attached to the decorative stylus with two screws. This arm allows the bucket to be unlocked by the bearing with a triangular cross-section wrench according to DIN 22.417 and its release by removal and proper handling.
Also, the bracket has a bucket stabilization system so that upon returning to the upright position, it securely locks and locks.
The decorative support bollard is made of a pipe 11 cm in diameter and 42 cm high and with the help of a traditional aluminum joint – extension piece contains a pipe 6 cm in diameter and 2 mm thick, total height 1.30 m. with an elegant aluminum ball 7cm in height and 8.5cm in the upper end and a tray 26cm in diameter, with 3 holes suitable for fastening it to the ground with screws or a protruding tube 25 in. long of landowners for its landfill, at your municipality’s choice.
The garbage cans have a very good finish and overall aesthetic appearance.
Trash receptacles can be fitted with a 50×100 mm aluminum plate with logo and proprietary information
METALLIC ELEMENTS
The metallic elements used in the manufacture of the equipment (screws, connectors, etc.) are made of metals either thermo-galvanized or electro-galvanized, where the surface preparation has been preceded by sandblasting or stainless steel. The dimensions and cross-sections of the metallic elements are sufficient to accommodate (with an appropriate safety factor) the loads for which they have been designed to withstand corrosion and adverse weather conditions.
PAINTS
The varnishes and paints that protect the wooden parts are specially designed for the climate of our country and are absolutely harmless to the users (they do not contain lead, chromium, cadmium or other heavy metals) and give high strength to our constructions.
For their anticorrosive protection, the metal parts are processed for polishing, followed by a coating of polyzinc (zinc) and then electrostatic, two-layer polyester powder coating.
All production work processes for the processing of raw materials are carried out according to:
The ISO 9001: 2015 quality system
The ISO 14001: 2015 Environmental Management System
