WOODEN STRUCTURE 0010-214

 

The composite instrument has a total dimension of 430×450 cm and a height of 362 cm and includes:

 

• 2 lofts 122 cm high
• 1 staircase for loft height 122 cm.
• 1 semicircular bridge
• 1 semi-circular rope climb
• 1 corrugated slide height 122 cm.
• 1 metal ascent – snake
• 2 squares cover
• 2 pairs of handles
• protective railings
• plugs for gears
• mounting bases

 

SQUARE 122 cm (with square cover)

 

The 122 cm loft has a total dimensions of 111,5X111,5X362 cm and consists of:

• 4 wooden pillars 9X9 cm and 302 cm high.
• 4 9x9x93.5 cm wood from which approximately 4x4x93.5 cm is removed along a piece.
• 1 Wireness Plywood, one side of which features a dark brown, non-slip floor. Its dimensions are 99X99 cm and its thickness is 21mm.
• 1 square polyethylene cover that applies to the top of the 4 columns.

The vertical wooden columns of 302 cm height are pierced at points of about 116 cm and 117 cm, one on each of the sides connected to the loft, from their base to the floor of the loft. These holes are fitted with 15 mm π 15 mm metal beams with two nuts in the corresponding height mounted on the wood hole. Fits with two 3 / 8X13 screws. The opening of the wood hole is sealed with a polypropylene (PP) plug.

The floor consists of 4 9x9x93.5cm woods, which support the wireness of the laminate flooring.

 

STAIR FOR FLAT 122 cm (for ages 3 years and over)

 

The staircase for loft height 122 cm has dimensions of 93×172 cm and projection length of loft114 cm. Consists of:

• 2 woods approximately 4,5x20x172 cm.
• 5 woods approximately 4,5x20x88 cm.
• 5 woods approximately 4,5x6x84,5 cm.

The 122 cm staircase handrail consists of:

• 4 wood with curved edges approximately 4,5x9x90 cm.
• 2 wood with curved edges approximately 4,5x9x160 cm.
• 2 specially shaped rectangular birch plywood colored with internal angles of about 45 ° and 135 °, inscribed in a rectangular rectangle of approximately 110×230 cm, 2 cm thick.

Between the 2 x 20×172 cm woods are placed the 5 x 4,5x6x84,5 cm x 20 cm woods. On these 5 5,5x20x88 cm woods are applied as presses.

The handrail is made as follows: The 2 woods 4,5x9x160 cm.

they are facing each other upwards. In these, they are screwed vertically 4,5,5x9x90 cm 2 by 2 on each side. Between the 20x 172cm stairs, the 4.5x9x160cm stairs and the 4.5x9x90cm vertical stairs, the rectangular gap on each side of the staircase is covered with birch plywood.

 

SEMI-CIRCULAR BRIDGE

 

The bridge is approximately 200×109 cm and 94 cm high and consists of:

• 4 columns approximately 7×4,5×94 cm in diameter.
• 4 curved timber cross sections approximately 4,5x10x191 cm.
• 2 curved woods approximately 8x10x200 cm.
• 2 woods approximately 9x9x99 cm.
• 2 colored birch plywood approximately 191x75x2 cm.
• 10 woods approximately 4x20x99 cm.

The floor of the semicircular bridge consists of two 8x10x200 woods and two 9x9x99 woods that form the frame of the bridge floor. In this frame are fixed the 10 4X20X99 wood flooring.

The two side handrails consist of a frame consisting of two 4,5x10x191 curved wood and 2 7×4,5×94 2 columns each and the intermediate gap is filled by the colored birch plywood. Various representations or themes can be etched on the birch plywood.

 

SEMI-CIRCULAR ROPE CLIMB (FOR LOFT 122 CM HIGH)

 

The rope curve is 93 cm wide and 160 cm wide and consists of:

• 10 pcs. wood 93x15x4,5cm (floor cushion)
• 2 pcs. curved – arched birch plywood colored color 160x18x2cm
• 3 pcs. wood size 93X10X4.5 cm
• 1 pc. wood 93,5x9x9 cm
• 2 curved – arc-shaped tubes Ø 1 ¼ ”3 mm thick and 2.5 m long.
• 2 pcs. ½ ”tube 90 mm thick 3 mm long
• 2 pcs. blades 150x4x0.4 cm
• 1 pc. 2m Ø 16mm polypropylene (PP) security rope
• 2 pcs. 24cm M12 metal fasteners

 

The semicircular rope ladder has a metal base at the bottom of it consisting of two curved 1 ¼ ”X 250 cm curved metal tubes with 150x4x0.4 cm blades (each blade is fitted to each tube along its base for a press ) are connected through two 90X½ ”X0.16 cm tubes.

The two ends of the base-bracket are fastened to the ground. Its upper end is applied to the loft 122 cm. The base on its upper surface bears the two arched marine piles (handrails at the point of application of the two curved arc-shaped metal pipes which are connected by 10 pieces of 93X15x4 wood. cm to create flooring.

At the lower end of the towel and in between, apply 3 pcs. 93x10x4,5cm wood for climbing aids. The 93.5x9x9 cm piece of wood is applied horizontally between the loft pillars and at a height specified by EN 1176. At its center and outside is applied a metal connector M12X24 cm with one end of the polypropylene coated edge. 200 cm Ø 16 mm cable and the other end of the cable is applied through the M12X24 cm connector to the third auxiliary press 93X10x4.5 cm. The cable must be stretched and not loose to prevent trapping of children. pursuant to standard EN 1176. At the entrance of the platform two safety handles applied.

 

STEEL METAL ASCENT (for loft height 122 cm)

 

The snake is 100x58x300 cm in size and consists of:

• 1 hot rolled galvanized plate, cross section Ø 32 mm, 3 mm thick and 300 cm high.
• 4 hot rolled galvanized sheets, cross section Ø 32 mm and 3 mm thick in semicircular form
• 1 galvanized hot rolled sheet of elliptical “P” shape, cross section Ø 32 mm and thickness 3 mm with dimensions of 93,5X100 cm.

At a height of 300 cm the semicircular laminates are glued starting at a height of 40 cm and are used as a ladder. They are applied in such a way as to leave a gap of 31,5X28 cm, to avoid trapping children. Apply an elliptical “P” shaped plate on top of the vertical plate.

 

SLIDE  STRETCH WAVES 122 cm.

 

The straight corrugated slide has a height of about 122 cm and a projection length of 215 cm.

Manufactured by the rotary extraction method. It consists of linear low density polyethylene and with the addition of materials that provide protection from UV radiation and against static electricity.

Each color, which is non-toxic, is applied by rotary extraction of the mold. It is a one-piece and mounted with a one-piece Hood cover of the same material for protection against falls

These materials are disciplined by:

• ASTM – D – 790 (Flex Modulus – Flexible elements)
• ASTM – D – 638 (Tensile Strength)
• ASTM -D- 648 (Heat Distortion Temperature- Heated Distortion)
• ARM – STD (Low Temperature Impact – low temperature impact effect)

The diameter of the side walls should be at least 5 cm thick.

Exceptions should be mentioned.

ASTM = the American Society for Testing and Materials, the American Materials Testing and Testing Service.

 

HOODS

 

The slide guard protects children from sitting in the seat to avoid accidents. It is 105 cm high, 87 cm wide and approximately 10 cm wide.

They are manufactured by the method of rotary extraction into molds. It consists of linear low density polyethylene and with the addition of materials that provide protection from UV radiation and against static electricity.

Each color, which is non-toxic, is applied by rotary extraction of the mold.

These materials are disciplined by:

• ASTM – D – 790 (Flex Modulus – Flexible elements)
• ASTM – D – 638 (Tensile Strength)
• ASTM – D – 648 (Heat Distortion Temperature – Heated Distortion)
• ARM – STD (Low Temperature Impact – low temperature impact effect)

ASTM = the American Society for Testing and Materials, the American Materials Testing and Testing Service.

 

SQUARE SHEEP

 

The square cover is approximately 122x122x70cm and has a hole-to-center dimension of 102.5cm on each side.

The cover is manufactured by the rotary extraction method molded. It is formed of linear low density polyethylene and with the addition of materials that provide protection from UV radiation and against static electricity.

Each color, which is non-toxic, is applied by rotary extraction of the mold. These materials are disciplined by:

• ASTM – D – 790 (Flex Modulus – Flexible elements)
• ASTM – D – 638 (Tensile Strength)
• ASTM – D – 648 (Heat Distortion Temperature – Heated Distortion)
• ARM – STD (Low Temperature Impact – low temperature impact effect)

ASTM = the American Society for Testing and Materials, the American Materials Testing and Testing Service.

PROTECTIVE FRAMEWORK-PANEL

The protective frame measures approximately 85X97X6 cm.

It consists of:

• 2 wooden columns approximately 4x6x97 cm.
• 1 plywood of colored birch approximately 85,5X90x2 cm.

Between the pillars is placed the birch plywood, approximately 85,5X90x2 cm, in which relief figures or themes can be carved. Place the protective frame flat above the loft floor and secure to the loft pillars.

 

SAFETY HANDLES

 

The safety handles are metallic electrostatic paint with vertical alignment in two, with the inner wrapped at the top. It has a metal mounting blade at its bottom and a mounting point at the top. They are made of a tube Ø 32 mm approximately 80 cm high and spaced apart according to EN 1176. After being degreased, they are coated with polyzinc (zinc) and then electrostatic powder coating.

The safety handles are mounted on points of the entry-exit lamps without panels (panels, railings, etc.).

 

BACKPACK BASES

 

For fixing the instrument to the ground, each pair has a pair of mounting bases.

The mounting brackets consist of two galvanized metal plates and then painted with electrostatic paint, “P” shaped and approximately 100x12x4 cm thick and 0.5cm thick, which “hug” the column and are joined by 5/8 bypass screws. ″ X15. At the bottom there is a metal flange to hold them in the concrete pit.

Only ground irons, which hold the column at least 5 cm above the ground, are prevented from being ground in order to prevent the wood from being corroded by soil moisture.

 

TIMBER

 

The wood used is composite non-stick Swedish pine timber, in accordance with EN 351. It is manufactured with special compound (welding of wood) in various sections depending on the intended use.

COMPOSITE wood is 40% stronger than whole wood. It has a strength of 360 kp / m2 and a specific weight of about 480 kg / m3.

• Contains about 15% moisture
• Contains minimal juices (resin) compared to other pine family trees in other countries (weather in Northern Sweden up to -25 ° C)
• Has thermal conductivity s = 0.10 Kcal / Mho and sound insulation 3.5 times greater than concrete or brick of equal thickness.
• It has antimagnetic properties and is a poor conductor of electricity
• Resistant to fire and classified in categories F30 and F60 (by DIN 4120) according to its cross-section.
• When the outer part of the cross-section burns, its interior protects and retains its durability.
• It is processed just like commercial wood
• Maintains its shape and distorts or creates minimal fractures
• Annual wood rings are usually perpendicular to the long side of the cross-section with a significant increase in the mechanical strength of this surface, if applied to floors.

All corners of the wood are planed with a radius of about 5 mm.

 

COLORED PLYWOOD BIRCH

 

The plywood elements required for our constructions are approximately 20 mm thick and are made of 1.5 mm thick laminated wood with pressurized heat sealant using non-toxic phenolic base resins. They are painted with water-soluble paints to which no seals, thinners or paints containing lead, chromium, cadmium or other heavy metals have been attached. The colors are also very resistant to adverse weather conditions.

The above plywood sheets are in accordance with EN 314-2. The quality of the plywood is such that no further processing is required before painting, such as, for example, stocking, and reliefs and themes can be engraved.

PLASTIC INFORMATION

The plastic components required to manufacture the equipment are highly resistant to UV radiation and adverse weather conditions. Preferred are recyclable materials such as polyethylene (PE) or polypropylene (PP). Specifically all screws protruding from the equipment over 5 mm are covered with polypropylene (PP) plastic plugs. They are also safe for the safety and health of children.

METALLIC ELEMENTS

Metallic elements used in the manufacture of the equipment (screws, connectors, etc.) are made of metals either thermo-galvanized or electro-galvanized, with surface preconditioned by sandblasting or stainless steel. The dimensions and cross-sections of the metallic elements are sufficient to accommodate (with an appropriate safety factor) the loads for which they have been designed to withstand corrosion and adverse weather conditions.

PAINTS

The varnishes and colors that protect the wooden parts are specially designed for the climate of our country (temperature changes, open or closed areas etc.) are completely harmless to the users (they do not contain lead, chromium, cadmium and other heavy metals) ) and give great strength to our constructions.

For their anticorrosive protection, the metal parts are processed for polishing, followed by a coating of polyzinc (zinc) and then electrostatic, two-layer polyester powder coating.

PACKING

 

The following procedure is used for fixing the equipment:

At this point where the column is to be placed, an 80 cm deep pit is opened. about 60cm in diameter. Then, once the column has been inserted, the pit is filled with fractured cone-shaped concrete until it reaches 10 cm from the ground surface, where it is covered with soil.

Only grounding irons, which hold each column at a distance of about 10 cm from the ground, are prevented on the ground in order to prevent the wood from being corroded by soil moisture.

 

All production work processes for the processing of raw materials are carried out according to:

• EN 1176 standards 1-6,
• ISO 9001: 2015 quality system
• The ISO 14001: 2015 environmental management system